logo
   Home page Rus About company mail

 

  Piezoceramic stack actuators

Rambler's Top100

пьезопакетные актюаторы stack actuators stack actuators


Piezoceramic stack actuators are made by stacking monolithic multilayer elements having alternating ceramic and electrode layers. The axis of the stack is the axis of a linear displacement. When voltage is applied, the thickness of the layer increases. As a result, the total length of the stack increases as well. The stack actuator is a rigid structure having a high capacitance and consisting of a number of piezo layers assembled into a monolithic unit by the sintering method. A small displacement of each layer is summed into a total displacement from several microns to dozen microns with the developed force being from hundreds to thousands Newton.

There are two types of piezoceramic stack actuators design:
bird piezoceramic plates are in the ring-shaped;
bird piezoceramic plates are in the disc-shaped.



APPLICATIONS
  • precise masks alignment in photo and X-ray lithography;
  • precise tool supply in medical equipment;
  • stand displacement for optico-mechanical devices (gas analyzers and dose meters control);
  • beam control in optical fiber devices;
  • adaptive optical systems, adaptive telescopes;
  • P-1 ÷ П-5 are intended for parallel displacement of optical elements in quantum generators;
  • PS-4, PS-5 are used in ring type quantum generators for automatic control of constant optical parameters;
  • PS-11 ÷ PS-14 are designed for linear displacement piezoceramic drivers.
    • empty
    PS-4PS-11PS-12 PS-13PS-14
    drawing of actuators drawing of actuators drawing of actuators drawing of actuators drawing of actuators
    empty
    P-1P-3P-4P-5
    p-1 p-3 p-4 p-5

    Position 1: silver foil-clad terminals are for soldering wires of МГТФ-007 or НВ-007 types to connect a piezo stack actuator to a voltage supply. empty

    GENERAL CHARACTERISTICS
    Characteristic, unit PS-4 PS-11 PS-12 PS-13 PS-14 P - 1 P - 3 P - 4 P - 5
    Sensitivity µ/V • 10-3, min 4.0 4.0 4.0 4.0 4.0 2 3 4.5 4.5
    Insulation resistance (MΩ) 20.0 50.0 50.0 50.0 50.0 50 50 50 50
    Static capacitance (pF·103), max 80000
    ±20000    		 65000
    ±12500    		 52000
    ±10000    		 22000
    ±4000    		 17000
    ±3500    		 0.068 0.037 0.025 0.037
    Maximum rated voltage (V) -300 ÷+ 500 +100 +600 +600 +600 +600 +600 +600 +600
    Mass (g) 20.0 15.0 15.0 6.0 6.0 10 6.0 6.0 6.0
    Operating temperature range º C -60 ÷ +85 -60 ÷ +65 -60 ÷ +65 -60 ÷ +65 -60 ÷ +65 -60 ÷ +85 -60 ÷ +85 -60 ÷ +85 -60 ÷ +85
    Dimensions (mm) Ø30xØ18x5,4 Ø20x5,4 Ø23xØ13x5,4 Ø20x1,8 Ø23xØ13x1,8 Ø30xØ18x3 Ø15x4,2 Ø23xØ13x1,8 Ø23x1,8
    Notes:
    – PS-11, PS-12, P-1, P-3 sensitivity is defined in the thickness vibrations mode;
    – PS-13, PS-14, P-4, P-5 sensitivity is defined in the radial vibrations mode;
    – Sensitivity is measured at U = 400 V;
    – PS-4 sensitivity is ± 1,2 m (min) at U = ± 300 V.

    actuatores_disk   actuat_stack

    ESSENTIAL CHARACTERISTICS
    Dimensions,
    mm x mm x mm    		 Mass (g), max Static capacitance (nF), max Operating voltage range (V) Maximum displacement, (µ), min Resonance frequency (kHz), min Blocking force (N), min Quantity of active layers
    ø 10 x ø 4 x 10 5.5 40 -200 ÷ 200 ± 1,0 125 450 8
    ø 10 x ø 4 x 15 8,5 60 -200 ÷ 200 ± 1,5 115 450 16

    actuat_stack   actuat_stack

    ESSENTIAL CHARACTERISTICS
    Dimensions,
    mm x mm x mm    		 Mass (g), max Static capacitance (µF), max Operating voltage range (V) Maximum displacement, (µ), min Resonance frequency (kHz), min Quantity of active layers
    ø 60 x ø M12 x 26 550 1 ± 500 ± 2.0 5 20
    вверх

    ON PURCHASE
    +7 495 530 00 31 and 535 26 90 fax +7 495 534 22 67
    or
    info@elpapiezo.ru
    or
    order directly from here.


    About Company | Piezoceramic | Production | Acoustoelectronics | News | Partners | Contacts | Rus | mail

    Webmaster

    Copyright ® 2002-2006 All rights reserved "Elpa" Company 2005-2006 Rambler's Top100